Creek E Series Inks

Washability Our white is bright and CMYK has nice washability. You will be pleased with the results. Directions: Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends achieve better results when used with a conveyor/heat press combination. Use low to medium pressure. Conversions If you are converting from other inks you will NOT need to flush your current ink set out.  SDS sheets are available upon request.  COMPATIBILITY Epson repurposed/based DTG's with a DX5 and DX7 head Printers with a 5113 head and more. BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, Neoflex NeoFlex 1,2 Melco Melco-Jet, G2, G3 Spectra Spectra 3000, Spectra 600 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, TexJet Plus, Shortee, Echo, Echo2, Shortee 2 Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY Printers All DIY Printers based on an Epson Printer Other Printers MS Zero, MS-One, Advantage, Chinese Brand   This DTG ink is recommended for use in Epson based DTG printers with a DX5, DX7, or 5113 head. For printers bigger than 12 inches wide in print area, it's best to use 35% humidity or higher for optimal performance. Please note that we are not affiliated with Epson or the companies listed above with respective printers in the compatibility chart. The Creek E Series Direct-To-Garment Ink is for repurposed Epson DTG's and is compatible ink (Non OEM). and any company listed above, such as is a registered trademark of the respective company. User assumes liability in using this product. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson. The Direct-To-Garment Ink – EPSON® Repurposed DTG Compatible ink is neither produced nor endorsed by the above listed companies. User assumes liability in using this product. Any company listed companies are registered trademarks of the respective companies. *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DIRECT TO FILM you should test before purchasing large volumes. WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.

Read more less

Genuine DuPont Artistri P5500 series is the new talk in town. Great hand and washability for Direct to Garment and Direct To Film Printing with low viscosity heads. If you don't know what viscosity is, check out our video here:  What Is Viscosity For DTG or DTF Inks? (youtube.com) DTG / DTF Printer Compatibility DuPont™ Artistri® P5500 ink is compatible with the following piezo printheads: DX4  DX5 DX7 iE3200 Available Colors: P5510 Cyan P5520 Magenta P5530 Yellow P5540 Black P5590 White *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Order may drop ship from DuPont depending on availability.  WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.

Read more less